MK Diamond MK-2000 - Manual (Page 12)

MK-2000 Revision 03/05, Effective Date March 21, 2005 Page 12
UNPACKING, TRANSPORT, UNIVERSAL STAND and ASSEMBLY
UNIVERSAL STAND:
The MK-2000 weighs one hundred and sixty-five (165) pounds; follow the guidelines for transport
in the TRANSPORT section, when placing it on the stand.
Note: If using the MK Diamond, Universal Stand, follow the following steps.
(A)
Open the Universal Stand and
place it on flat surface
(B)
Remove the Water Pan
(C)
Orient the Saw to the Stand
(D)
Seat the front Saw cross-brace
into the two retaining slots on
the front of the Stand
(F)
Reinstall the Water Pan
Slide Water Pan
out rear of Saw
Slide Water Pan
into back of Saw
Front of
Saw
Rear of
Saw
Front of
Stand
Rear of
Stand
Cross-brace
Retaining
Slot
Register Angle Rear Brace
Retaining Slot
(E)
Seat the rear Saw brace into the
two retaining slots on the rear of
the Stand and over the Register
Angle