MK Diamond MK-2000 - Manual (Page 11)

MK-2000 Revision 03/05, Effective Date March 21, 2005 Page 11
UNPACKING, TRANSPORT, UNIVERSAL STAND and ASSEMBLY
UNPACKING:
Your MK-2000 has been shipped from the factory thoroughly inspected. Only minimal assembly is required.
Use proper lifting techniques when lifting the MK-2000.
CONTENTS:
In your container, you will find one (1) MK-2000 and water basin, one (1) MK-2000 movable cutting table, one
(1) adjustable cutting guide, one (1) electric water pump, one (1) pump discharge fitting, one (1) cooling
transfer tube, one (1) flow adjusting clamp, one (1) drain plug, one (1) blade wrench, one (1) owners manual,
one (1) pump manual and one (1) warranty card.
MK-2000 Frame
and Water Basin
Movable
Cutting Table
Adjustable
Cutting Guide
Electric
Water Pump
Pump
Discharge Fitting
Cooling
Transfer Tube
Flow
Adjusting Clamp
Drain Plug Wrench Owners
Manual
Pump
Manual
Warranty
Card
TRANSPORT:
1. The MK-2000 weighs approximately one hundred and sixty-five (165) pounds.
2. Never transport the MK-2000 with water in the Water Basin.
NOTE: Lock the Cutting Head in the "DOWN" position and remove the Movable Cutting Table when
transporting the MK-2000.
The MK-2000 Pro is designed with recessed handles in the right and left upright castings for ease of
transport. To transport –
• Verify the Movable Cutting Head is locked in the down position and the Movable Cutting Table is removed
• Grasp the saw by the recessed handle in the right and left upright castings
• Grasp the front of the saw
• Lift and transport the saw to the desired work location
Lift Point
Cutting Head
Locked Down
Lift Point
Remove Movable
Cutting Table