MK Diamond MK-2000 - Manual (Page 26)

MK-2000 Revision 03/05, Effective Date March 21, 2005 Page 26
MAINTENANCE AND TROUBLESHOOTING
3. Monthly Maintenance:
The following maintenance should be performed monthly.
(E)
Verify the Movable Cutting
Table Roller Wheels are tight
and in good condition
(G)
Verify the Motor Adjustment
Strap is tight
(F)
Verify all motor mounting Bolts
are tight
(B)
Clean the Outer Flange and
Retaining Screw
(C)
Clean the Inner Flange
Outer
Flange
Verify
Tight
Verify Four
Bolts Tight
(A)
Remove the Diamond Blade
Retaining Screw
and Outer Flange
Rotate counter-
clockwise to loosen
Outer
Flange
Retaining
Screw
(D)
Lubricate the Retaining Screw
and Retaining Screw Hole
Retaining
Screw Hole
Retaining
Screw
Verify Adjustment
Strap Tight