Memmert ICH C (with CO2 control) Climate chambers - Manual (Page 60)

60 D30393 | Date 10/2014
Menu mode
7.8 Protocol
The appliance continually logs all relevant measured values, settings and error messages at
1-minute intervals. The internal log memory is of the continuous memory type. The logging
function cannot be switched off and is always active. The measured data are stored in the
appliance, safe from manipulation. If the power supply is interrupted, the time of the power
failure and voltage recovery are stored in the appliance.
You can export the protocol data for different periods to a USB storage medium via the USB
interface or, via Ethernet, import them to the AtmoCONTROL software for graphical represen-
tation, print-out or storage.
The log memory of the appliance is not modified or deleted by reading it out.
1. Connect the USB storage medium to the
interface on the right side of the control
panel.
2. Activate the protocol. To do so, press
the activation key on the right side of
the PROTOCOL display. The display is
enlarged and the period This Month au-
tomatically highlighted. To select another
logging period, use the turn control.
UFP 100
Protocol
Last download 12.10.2012 12:00
1 month
SETUP
SOUND
CALIBRATION
LANGUAGE
SETUP
SOUND
CALIBRATION
LANGUAGE
Complete control range
1 week
3. Save your selection by pressing the confir-
mation key. The transfer starts and a
status symbol indicates the progress.
Hauptschalter
>
Zu der Typenbezeichnung gibt es momentan drei Entwurfsrichtungen,
ich kann Ihnen noch nicht sagen, ob Memmert hierzu schon eine Entscheidung
getroffen hat.
Die hier gezeigt Variante, ist die von uns empfohlene Richtung.
UF 110 PLUS
ON
344
.4
444 4 .
TEMP
Set
°C
°C
FLAP 40
%
TIMER
h d
10 02
End Sept. 29 22 24
FAN
%
0
%
100
ALARM
max
444 .4°C
auto
+/- 0.0 K
min
444 .4°C
O O ON N N N O O N O
Manu
44.Sept
Protocol
letzter Download 12.10.2012 12:00
This Year
Complete control range
This Month
4. As soon as the transfer is complete, a
check mark appears in front of the period
selected. The USB storage medium can
now be removed.
Protocol
letzter Download 25.10.2012 13:20
This Year
Complete control range
This Month
AtmoCONTROL or
read them out via Ethernet, please observe the separate AtmoCONTROL manual.