Memmert ICH C (with CO2 control) Climate chambers - Manual (Page 28)

28 D30393 | Date 10/2014
Operation and control
The status display shows you which operating mode or operating state the appliance is
currently in. The current operating state is highlighted in colour and indicated by the text
display:

Appliance is in programme mode
■
Programme is stopped
Appliance is in manual mode
The example on the right shows the appliance in manual
mode, identified by the coloured hand symbol.
►
When the appliance is in timer mode, Timer active is
displayed:
►
When the appliance is in remote control mode, the
symbol appears in the temperature display:
5.4.4 Manual mode
In this operating mode, the appliance runs in permanent
operation at the values set on the ControlCOCKPIT.
Adjustment options Adjustment options
As described in chapter 5.4.2 , you can set the following
parameters after pressing the corresponding activation key (in any sequence):
Temperature
Temperature
Adjustment range: dependent on model and operating mode (see
nameplate and technical data on page 13)
Heating operation is indicated by the symbol. symbol.
Cooling is indicated by the symbol.
You can select °C or °F as the temperature unit displayed (see
page 48).
22
.4
37
.0
TEMP
Set
°C
°C
Fan speed Fan speed
Adjustment option: 10 % to 100 % in steps of 10%
FAN
%
50
Humidity Humidity
Adjustment range: 10 to 80 % rh
Humidification is indicated by the symbol.
Dehumidification is indicated by the symbol.
HUMIDITY
70
%rh Set
34
% rh
Manual Mode
12.Sept.2012 13:44
Timer active
12.Sept.2012 13:44
23
.2°C
TEMP
Set 180
.0°C