Memmert ICH C (with CO2 control) Climate chambers - Manual (Page 15)

D30393 | Date 10/2014 15
Construction and description
2.10 Ambient conditions
►
The appliance may only be used in enclosed areas and under the following ambient condi-
tions:
Ambient temperature
15 °C to 28 °C (to 34 °C with limited temperature
and humidity range)
Humidity rh max. 70 %, non-condensing
Overvoltage category II
Pollution degree 2
Altitude of installation max. 2,000 m above sea level
►
The appliance may not be used in areas where there is a risk of explosion. The ambient air
must not contain any explosive dusts, gases, vapours or gas-air mixtures. The appliance is
not explosion-proof.
►
Heavy dust production or aggressive vapours in the vicinity of the appliance could lead to
sedimentation in the interior and, as a consequence, could result in short circuits or dam-
age to electrical parts. For this reason, sufficient measures to prevent large clouds of dust
or aggressive vapours from developing should be taken.
2.11 Scope of delivery
►
Power cable
►
Sliding grid (load capacity 30 kg each)
►
Water tank with connection hose
►
Gas pressure tube
►
USB storage medium with software and AtmoCONTROL manual
►
The operating instructions at hand
►
Calibration certificate
►
Separately packaged fastening material for wall mounting (see page 19)
►
Tank holder (only for appliances of size 750, see page 21)
2.12 Optional accessories
►
USB to Ethernet converter (Fig. 7). Makes it
possible to connect the Ethernet connection
interface (see page 12) to the USB port of
a computer / laptop.
►
Reinforced, sliding steel grids with a load
capacity of 60 kg each (for appliance size
110 and larger)
Fig. 7 Converter USB to Ethernet