Lenze 931W - Manual (Page 39)

Application examples
Preconditions
7

39 GHB 13.0002-EN 3.1
7 Application example
7.1 Preconditions

Stop!
Before the first commissioning, the motor of the drive system or the
integrated servo inverter should be placed on a level surface. The motor shaft
should be freely movable and protected against contact. Ensure that the key is
secured (if accessible).
Install the ”fluxx” software on your PC. For this, copy the program provided to your
computer and start it with a double-click from the directory to which you have copied the
program.
7.2 General information
The ”fluxx” user software has been developed for the commissioning, test purposes and
easy monitoring of the drive. Use the software to easily start the servo inverter.

The ”fluxx” functions are explained in the ”fluxxtorque servo inverter”
Software Manual.

Note!
Operation of the software requires the Microsoft operating system Windows
NT 4.0, Windows 95/98, Windows 2000 or Windows XP.
7.3 Menu pages
For this example, you only need the menu pages Setup, Status and Driving program. The
following sections describe the functions of the individual menu pages.