Lenze E82ZBL-C - Manual (Page 81)

Diagnostics
LED status displays
8
EDKMF2102 DE/EN/FR 7.1
81
l
H1_Diagnose−−−(DUMMYSEITEVOR)−−−
8 Diagnostics
LED status displays
Pos. Colour Status Description
0 Green On The communication module is supplied with voltage and has a
connection to the drive controller.
Off The communication module is not supplied with voltage. The
controller or the external voltage supply is switched off.
Blinking The communication module is supplied with voltage, but is not (yet)
connected to the controller because ...
l the communication module has not been correctly attached to the
controller;
l data transfer to/from the controller is not yet possible (e.g.
controller is in initialisation mode).
1 Yellow Blinking The controller receives a telegram.
2 Yellow Blinking The controller sends a telegram.
3 Red /
green On /
blinking The red and green drive LEDs indicate the operating status of the
82XX, 8200 vector, 93XX, 9300 Servo PLC and Drive PLC standard
device (see operating instructions for the standard device).