Lenze E82ZBL-C - Manual (Page 78)

7 Commissioning
Commissioning for 9300 series standard devices
EDKMF2102 DE/EN/FR 7.1
78
l
Inbetriebnahme93XX
Detailed
information Procedure Step
4. Make other necessary controller settings.
W Commissioning of the controller Documentation
for the respective
controller
l For initial commissioning set code C0005 = 1011 (signal
configuration: speed control via AIF).
l Enable the controller.
– Terminal 28 (RFR: controller enable) is always active and has
to be HIGH during operation. Otherwise the controller will be
inhibited.
l Select the speed setpoint with C0141 in % of n max (value in
C0011).
Note
With the signal configuration C0005 = xx11, terminal A1 is switched
as a voltage output. This means that only the following terminals
should be connected:
l X5.A1 to X5.28 (Controller enable)
l X5.A1 to X5.E1 (Clockwise rotation / QSP)