Lenze E82ZBL-C - Manual (Page 58)

5 Mechanical installation
EDKMF2102 DE/EN/FR 7.1
58
l
H1_MechINS−MechInst
5 Mechanical installation
2102LEC014
Fig. 1 Attaching the communication module
ƒ Plug the communication module onto the standard device (here: 8200 vector).
ƒ Tighten the communication module to the standard device using the fixing screw in
order to ensure a good PE connection.
)
Note!
For the internal supply of the communication module by the 8200 vector
frequency inverter the jumper has to be adjusted within the interface opening
(see illustration above).
Observe the notes ( ^ 63).