Leica Biosystems CM1850 UV - Manual (Page 16)

16 Instructions for use V 2.6 – 10/2012
4.4 Handwheel assembly
• Insert the pin (1) of the handwheel shaft in to
the hole (2) of the handwheel.
• Mount the spring washer (3) on the screw (4)
as shown in Fig. 16 .
• Tighten the screw (4) with an Allen key (5 mm).
• Attach the cover disc (5) (self-adhesive).
To dismount, proceed in reverse order.
The handwheel including the fixing components are packed in the
cardboard box for the accessories.The handwheel can be dis-
mounted for transporting (e.g. narrow doors).
Fig. 5
4. Unpacking and installation
3 4 5
2 1