Landoll ICON 414 - Manual (Page 39)

U Assembly Drawbar and Swivel Hitch
ICO0368
ICO0369
ICO0370
4001050
The pivot pin
ICO0370 is held
in place with (2)
3/16 x 3 1/2”
cotter pins
ICO0123
IC
O
0
1
2
1
Above are the components of the ICON Quick Attach System. Back the power unit close enough to hook the
hydraulic lines. Pull the snap pin , remove the lock down pin and pivot the ears back , out of the way.
Hydraulically raise the tongue of the machine, until it clears the u assembly then back the assembly under the
hitch, into position. Lower the hitch into the u assembly cradle and pivot the lock down ears over the adepter ,
replace the lock down pin and snap pin. Hook up is complete.
To dismount the unit, reverse procedure.