Landoll ICON 414 - Manual (Page 3)

ICON Dealer Pre-Delivery Checklist
o
Lubricate the machine with high temp grease, per the listing in the manual and
the decals on the machine.
o
Plug in the hydraulic hoses per the information in the manual and on the
ICON hitch. The hoses have color coded bands and the instruction decal on
the hitch, will aid in the proper hookup. (the hydraulic hookup is only
recommended and should be adjusted to the owner/operator’s preference.
o
Cycle the machine, checking performance and any possible leaks. The ICON
earthmover has been filled with hydraulic fluid and cycle checked at the
factory, however, air pockets can still exist, in the system. Check the tractor to
be sure the hydraulic valves have been adjusted to maximum flow.
o
Plug in the safety lights and check the function of the stop and turn signals.
o
If the machine is equipped with the optional brake package, plug the
connector into the tractor receptacle. By moving the tractor forward and
applying the brakes, resistance should be felt, from the scraper.
NOTE: ICON products are a fully assembled as possibly allowed for shipping.
Hydraulic systems are filled and cycle tested at the factory, if assembly of those
components can be allowed for shipping. Every effort is taken by ICON to simplify
predelivery by the ICON Dealer.
Should you have any questions in regard to setup or predelivery, please contact
ICON Product Support for assistance.