Landoll ICON 414 User Manual
Page 16

About the ICON Limited Warranty……..
The ICON 400 Series scraper is designed with rear lowering and a push bumper (optional) on
the rear. The responsibility of use of this push bumper is left up to the discretion of the owner and
operator.
When push loading a pull type scraper, there are many issues to contend with so as not to
damage the scraper or the pull type tractor. The most important is the operator. The push tractor
can be an issue. Size and power must be kept within reasonable range. Should the pull tractor
operator put the scraper bit too deep into the ground, damage can occur due to undue stress on the
frog of the scraper. A straight push is necessary. Out of line or side stress can damage the rear
frame and possibly the scraper tires. Hard hits on link up with the push bumper can also damage
the machine. Whether loading single or tandem machines, care must be taken not to jackknife the
machines. Trained operators and common sense will create less damage and downtime. When
pushing in a bogged down or stuck condition, extreme care must be taken so as not to side stress
or damage the rear frame.
Due to the many ways in which the scraper can be damaged while pushing.
ICON will not Warranty damage to the scraper occurred while pushing.