Landoll XO108/XO108-1 X-Fold Pulverizer - Manual (Page 15)

6J862 683rev501 Page 10A
PULVERIZER WHEEL PLACEMENT
19’ - 27’ Wide Models with
20” Ductile Notched Wheels
(9J808)
PULVERIZER WHEEL PLACEMENT
19’ - 27’ Wide Models with
20” Ductile Residue Crowfoot Wheels
(3K712-8 Lug)
“XD” Models
“XR” Models
Position Axle
Clamp to outside
Position
Welded Ring on
Axle to inside
Position Axle
Clamp to outside
CENTER SEC-
TION
(27 Wheels)
WING
ASSEMBLY:
5’=15 Wheels
6’=18 Wheels
7’=21 Wheels
8’=24 Wheels
9’=27 Wheels
CENTER SECTION
(18 Wheels, 17 Spacers)
WING
ASSEMBLY:
5’=10 Wheels, 9 Spacers
6’=12 Wheels, 11 Spacers
7’=14 Wheels, 13 Spacers
8’=16 Wheels, 15 Spacers
9’=18 Wheels, 17 Spacers
Position
Axle Clamp
to outside
Position
Welded Ring on
Axle to inside
Position Axle
Clamp to outside
The above diagrams show the placement assembly of the center and wings of Pulverizers using notched and
8-lug residue wheels. When assembling wings to centers, positon the axle clamps on the wings toward the
outside of the machine. Also, make sure direction of rotation arrows on crowfoot wheels agree on all
wheels.
Direction of Arrows
must agree on all
wheels