Landoll XO108/XO108-1 X-Fold Pulverizer - Manual (Page 14)

6J862 683rev501 Page 10
PULVERIZER WHEEL PLACEMENT
19’ - 27’ Wide Models
with 18” Smooth Wheels (A-46)
Position Axle
Clamp to outside
Position
Welded Ring on
Axle to inside
Position Axle
Clamp to outside
CENTER SECTION
(A-46, 25 Wheels
A-86, 2 Wheels)
WING
ASSEMBLY:
A-46: 5’=15 Wheels
6’=18 Wheels
7’=21 Wheels
8’=24 Wheels
9’=27 Wheels
A-86: All sizes=2 Wheels
A-86
Wheel
A-86
Wheel
A-86
Wheel A-86
Wheel
“X” Models
“XC” Models
Direction of Arrows
must agree on all
wheels
A Green Pipe Axle
Must Be Used in the Center
Part Numbers are located
on wheel spokes
PULVERIZER WHEEL PLACEMENT
19’ - 27’ Wide Models with
20” Crowfoot Wheels (1D938; 17 Lug)
CENTER SECTION
(18 Wheels, 17 Spacers)
WING
ASSEMBLY (1D938):
5’= 8 Wheels, 9 Spacers
6’=10 Wheels, 11 Spacers
7’=12 Wheels, 13 Spacers
8’=14 Wheels, 15 Spacers
9’=16 Wheels, 17 Spacers
Position
Axle Clamp
to outside
Position
Welded Ring on
Axle to inside
Position Axle
Clamp to outside
1D939
1D940
1D939
1D939
1D940
1D940
A Green Pipe Axle
Must Be Used in
the Center
Part Numbers are located
on wheel spokes