beautypg.com

Transmission drive bolt, See figure 3-4 – Landoll SS/SSB/SSP/SSBP 8, 10, 12 Sure Stand Seeder User Manual

Page 41

background image

OPERATION

3-3

Figure 3-4: Micro-meter

Transmission Drive Bolt

A 1/4” x 2-1/4” Grade 5 bolt connects the 6 tooth #550
roller chain sprocket to the front transmission shaft.

NOTE

This bolt must be removed for calibration and can also be
removed if it is desired to use the seeder as a roller only
(The Acre Meter will not register when the bolt is
removed). See Figure 3-5.

Figure 3-5: Transmission Drive Bolt

Seed Rate

Adjusting Nut

Large

Locknut

Important

Do Not Loosen Or Adjust These

Nuts For This Adjustment.

Bearing

Transmission Drive Bolt