Kinze Grain Carts Rev. 7/14 - Manual (Page 19)

TM
Grain Cart M0238-01
5/12 2-5
Operation
Unload Grain Cart
NOTICE
Do not operate tractor PTO above 750 PTO RPM with augers empty
or equipment may be damaged.
NOTICE
Roll tarp must be completely open during unloading operations or
suction will damage equipment.
NOTE: Vertical auger tilt must be in fully retracted position to fold/unfold.
1. Open roll tarp completely.
2. Unfold vertical auger.
3. Engage PTO at low tractor RPM.
4. Engage horizontal auger.
5. Start to open flow gate and increase tractor RPM.
6. Set grain flow and tractor RPM to desired level.
7. Adjust auger tilt and/or tip spout.
8. Slow tractor RPM as cart reaches empty
9. Close flow gate.
10. Disengage horizontal auger.
11. Allow vertical auger to clean out and disengage PTO.
12. Ensure auger tilt is in full vertical position.
13. Fold auger to storage position.
DANGER!
Contacting or coming close to power lines or other high energy
sources will cause death or serious injury. Keep away from power
lines or high energy sources at all times.