Kinze ISOBUS Electronics Package (3000 Series) Rev. 5/14 - Manual (Page 26)

M0246 ISOBUS
20 Rev. 5/14
TM
PLANT SCREENS
Tap the pages button to toggle through the plant screens.
F
PAGE
2 OF 4
3:00 PM
ON
F
PAGE
2 OF 4
E J
G
CORN
A
CONTROL
10
B
POPULATION
32.1
ON OFF
TC PLANTER
4 8 12 16 20 24 28 32 36 40 44
60%
0%
100%
120%
seeds
/acre
POPULATION
32,100
SPACING 6 in
ACCURACY 99 %
SINGULATION
93
SKIPS
%
4 %
DOUBLES 3 %
SECTIONS
1
ON
2
ON
3
ON
4
ON
SPEED
5.5
AREA
MPH
120 acres
ACRE / HOUR 40
80%
2/2
C
JUMPSTART
G
UNLOCK
SECTION
3:00 PM
ON
F
PAGES
E J
A
CONTROL
DOWNFORCE
DEPTH
NORM
2.5 10
3 of 4
G
CROP TYPE
CORN
B
POPULATION
32.1
ON OFF
GPS ALARM-5 PLANTER
4 8 12 16 20 24 28 32 36 40 44
ROW SCAN - #2
34,000
SINGULATION ACCURACY
seeds
/acre
18.2 in
seeds
/acre
seeds
/acre
97 %
SKIPS 1 %
DOUBLES 2 %
HIGH ROW - #1
34,000
SINGULATION ACCURACY 98 %
SKIPS 0 %
DOUBLES 2 %
LOW ROW - #3
26,500
SINGULATION ACCURACY 98 %
SKIPS 2 %
DOUBLES 0 %
VACUUM BULK FILL PRESSURE
12
in
60%
0%
100%
120%
80%
C
JUMPSTART
G
UNLOCK
SECTION F
PAGE
2 OF 4
F
PAGE
3 OF 4
Planter ON/OFF is the master on/off switch for the planter. This switch will turn clutches and the hydraulic drive on
and off.
Population displays a large readout of the average seed population as well as seed spacing and the population
accuracy.
NOTE: Population accuracy = 100% + % of doubles - % of Skips.
Singulation displays a large readout of the average singlulation as a percentage as well as the skips and doubles.
NOTE: Singlulation is a measurement of how well the seed meter is working.
NOTE: Singlulation accuracy = 100% - % of doubles - % of Skips.
Speed displays the miles per hour, along with how many acres planted per hour, and the area.
Population Bar Graph represents one row per line. The green line is the target rate. Red bars indicate when the
population is above or below the specified threshold. See Population Monitoring to adjust thresholds.
vacuum displays vacuum level.
Bulk Fill Pressure displays the pressure level of the bulk fill system.
Row Scan displays a large readout of seed population for individual rows as well as singulation accuracy, skips and
doubles. This box will rotate through all rows changing every 5 seconds.
Section Control Buttons are used to turn sections on and off manually. For example, if the section control button on
the main screen is turned OFF, the sections can be turned on manually here. If the section control button on the main
screen is turned ON, the sections can be turned off manually.
Planting Setup