JULABO HT60-M3 High Temperature Circulator - Manual (Page 21)

HT60-M2 / HT60-M3
21
40 Stand rod attachment with mouting screw;
∅12; M8
41 Connector for liquid level indicator or
second expansion vessel; M16x1 /
∠37°
42 Drain plug for bath liquid; M16x1
43/43a Expansion vessel / Connector for expansion vessel; M16x1
(When filling it serves as funnel)
44/45 Cooling water connectors
at the HT60, M12 / ∠37°
OUT – outlet (44), IN – inlet (45)
• Connection for cooling water or
• Connection for clocked cooling water with magnetic valve or
• Connection for clocked cooling water out of the CU-unit
46/47 Cooling water connectors at the
C.U.-cooling unit; ∅10
IN –inlet, OUT – outlet
48 Overflow connector
∅15,5 / G ¼ ″ Internal thread
49 Inert gas connector
∅10; M8x1 Internal thread
50 Pump connector for external temperatur application
Return; 16x1
51 Pump connector for external temperatur application
Feed ; 16x1
52 Pump connector for C.U.-cooling unit - Return; M16x1
(Cooling circuit )
53 Pump connector for C.U.-cooling unit - Feed; M16x1
(Cooling circuit )
54 Drain plug for cooling water; M10x1
55 Control cable with 16-channel plug for
connection of the M2 or M3 control electronics
56
56a
56a Control cable with 6-channel plug for connection of the C.U.-cooling unit
Control exit for C.U.-cooling unit
or
Control exit for magnetic valve (for clocked cooling water)