JULABO FP45-HE Refrigerated and Heating Circulators - Manual (Page 4)

4
9.3. MENU PUMP - Setting of pump pressure ...............................................................38
9.4. MENU CONFIG - Configuration of unit ....................................................................39
9.4.1. Remote control via the serial interface ................................................................40
9.4.2. Keypad control or setpoint setting via the analog input .......................................41
9.4.3. AUTOSTART ......................................................................................................41
9.4.4. OFF-MODE ........................................................................................................42
9.4.5. ACTVAR - actuating variable ..............................................................................42
9.4.6. Setting of clock and date ....................................................................................43
9.4.7. RESET – Factory settings...................................................................................43
9.5. MENU CONTROL – Control characteristics and parameters...................................43
9.5.1. CONTROL – Control INTERNAL / EXTERNAL ...................................................45
9.5.2. SELFTUNING .....................................................................................................46
9.5.3. Dynamic internal .................................................................................................46
9.5.4. Control parameters– XP-, TN-, TV- INTERNAL ..................................................47
9.5.5. COSPEED - external ..........................................................................................48
9.5.6. Control parameters – XPU-, XP-, TN-, TV- EXTERNAL ......................................48
9.6. MENU SERIAL - BAUDRATE, HANDSHAKE, PARITY ...........................................49
9.7. MENU ATC - Absolut Temperature Calibration .......................................................50
9.7.1. ATC SENSOR - INTERNAL / EXTERNAL ..........................................................52
9.7.2. ATC STATUS - YES / NO ...................................................................................52
9.7.3. CALIBRATION TYPE: 1 -/ 2 -/ 3 POINT..............................................................53
9.7.4. Example: 3-point calibration for internal control .................................................54
9.8. MENU LIMITS .........................................................................................................56
9.8.1. Limits for internal control .....................................................................................57
9.8.2. Limits for external control ....................................................................................57
9.9. MENU IN/OUT – Analog inputs/outputs (Option) .....................................................59
9.9.1. Outputs of the connector - REG+E-PROG ..........................................................62
9.9.2. Input of the connector - REG+E-PROG ..............................................................63
9.9.3. ALARM-output / Stand-by-input ..........................................................................65
10. Troubleshooting guide / error messages ......................................................................67
11. Electrical connections ..................................................................................................70
12. Remote control ............................................................................................................72
12.1. Setup for remote control ..........................................................................................72
12.2. Communication with a PC or a superordinated data system ...................................72
12.3. List of commands ....................................................................................................73
12.4. Status messages ....................................................................................................76
12.5. Error messages .......................................................................................................76
13. Installation of electronic module ...................................................................................77
14. JULABO Service – Online remote diagnosis ................................................................78
15. Cleaning / repairing the unit .........................................................................................79