JULABO FP45-HE Refrigerated and Heating Circulators - Manual (Page 33)

HE
33
Menu level 1
Analog inputs/outputs Page 59
Recorder output – CHANNEL 1, 2, 3
EPROG – External programmer input
EX-STBY - STAND-BY input
ALARM - output
9.1. MENU PROGRAM – START
Start-Menu
This menu will start a previously set program.

Requirements:
1. Create a program. (refer to next chapter)
2. Return to the Start-MENU and confirm the desired setting of each
MENU item with the key
3. Set a start time (>TIME< >DATE< >YEAR<) if the program is to be
started by the internal timer.
Menu level 1

> STEP< Program start at section 1 … 10
> RUNS < Number of repetitions 1 ... 99
> END< Status at end of program (STDBY/SETPNT)
Standby or last setpoint
> GO < Time of start (NOW/TIMER)

Press the key if a parameter is to be retained.
Correction function for parameters or values (prior to OK)
Level 2 Parameter level

•
Set program step with
and
example: STEP 1

•
Set number of runs with
and
example: 1 run

or
•
Set desired parameters with
and .

(STDBY / SETPNT)
Parameter STanDBY: the circulator switches to –
OFF-.
Parameter SETPoiNT: the circulator constantly
keeps the temperature at the value of the last step.