INFICON HPG400-SP ATM to High-Vacuum Gauge (Profibus) - Manual (Page 5)

tira36e1-a (0310) BPG/HPG400 v1.cp
5
3.2.3.2 Status 29
3.2.3.3 Data Type 29
3.2.3.4 Data Unit 29
3.2.3.5 Reading Valid 30
3.2.3.6 Full Scale 30
3.2.3.7 Safe State 30
3.2.3.8 Safe Value 30
3.2.3.9 Overrange 31
3.2.3.10 Underrange 31
3.2.4 Analog Sensor Input Function Block Instances 3 and 4 / SLOT 1 32
3.2.4.1 Process Value 32
3.2.4.2 Status 33
3.2.4.3 Data Type 33
3.2.4.4 Data Unit 33
3.2.4.5 Reading Valid 33
3.3 Transducer Block 33
3.3.1 One Of N Vacuum Gauge Transducer Block / SLOT 1 33
3.3.1.1 One Of N Status Extension 33
3.3.2 Heat Transfer Vacuum Gauge Transducer Block / SLOT 1 33
3.3.2.1 Block Type 33
3.3.2.2 Status Extension 34
3.3.2.3 Sensor Alarm 34
3.3.2.4 Sensor Warning 34
3.3.2.5 Full Scale State 34
3.3.3 Hot Cathode Ion Gauge Transducer Block / SLOT 1 35
3.3.3.1 Block Type 35
3.3.3.2 Status Extension 35
3.3.3.3 Sensor Alarm 35
3.3.3.4 Sensor Warning 35
3.3.3.5 Emission Status 36
3.3.3.6 Emission Current (BPG400-SP Only) 36
3.3.3.7 Degas Status (BPG400-SP Only) 36
3.3.3.8 Hot Cathode Block State Command (BPG400-SP Only) 36
Appendix A: Definitions 37
Appendix B: Block Type 40
Appendix C: Electrical Connections 41
Appendix D: Literature 43
For cross-references to other documents, the symbol ( → [XY]) is used.