HYDAC HLB 1300 - Manual (Page 25)

User Manual HYDACLab ® 23.10.2008
10
9. Order details
HLB 1 3 0 8 - 1 C - 000 - F 1
Serial number, factory set
Variables
3 = Temperature
Relative
humidity
Relative change in dielectric constant (DC)
Type of connection, mechanical
0 = G 3/4 A DIN 3852
Type of connection, electrical
8 = M12X1, 5-pole (mating connector not supplied)
Type of signal, output 1
1 = NC switching output
Type of signal, output 2
C = analogue output 4 .. 20 mA, 3-conductor line
Modification number
000 = standard
Seal material (parts in contact with the fluid)
F = FPM seal
Material of connection (parts in contact with the fluid)
1 = stainless steel
10. Dimensions