HiRO H50212 - Manual (Page 74)

User’s Guide Configuring your Computers
74
WEP + Encryption Key
WEP aims to provide security by encrypting data over radio
waves so that it is protected as it is transmitted from one end
point to another. However, it has been found that WEP is not as
secure as once believed.
3. From the Encryption drop-down list, select WEP setting.
 Click Set WEP Key button.
 From the Key Length drop-down list, select 64-bit or 128-bit
setting.
 From the Key Format drop-down list, select ASCII (5
characters), Hex (10 characters), ASCII (13 characters) or
Hex (26 characters) setting.
 From the Default Tx Key drop-down list, select a key is
used for encryption.
 Enter the Encryption Key value depending on selected
ASCII or Hexadecimal.
 Click Apply Changes button.
Function Button Description
Apply Changes Click to save the rule entry to the configuration.