HiRO H50212 - Manual (Page 65)

User’s Guide Configuring your Computers
65
DHCP Relay Configuration
1. From the left-hand LAN menu, click on DHCP Settings.
2. From
Services check ratio, click on DHCP Relay Mode.
3. Type DHCP server IP Addresses for DHCP Relay.
4. Click
on Apply Changes.
5. From the left-hand menu, click on Save.
Field Description
DHCP Server
Address Specify the IP address of your ISP’s DHCP server.
Requests for IP information from your LAN will be
passed to the default gateway, which should route the
request appropriately.
Function Button Description
Apply Changes Set new DHCP server configuration. New parameters
will take effect after save into flash memory and reboot
the system. See section “Admin” for save details.