Dhcp server configuration - set dns manually – HiRO H50212 User Manual

Page 151

Text mode
Original mode

User’s Guide

Configuring your Computers

151

DHCP Server Configuration - Set DNS Manually

1. From

the

head

Services menu, click on DNS -> DNS

Server.

2. From check ratio, click on Attain Set DNS Manually.
3. Enter the IP Address of DNS.
4. Click

Apply Changes.

5. From the left-hand menu, click on Save.

Field

Description

Attain DNS
Automatically

Select this item if you want to use the DNS servers
obtained by the WAN interface via the auto-
configuration mechanism.

Set DNS
Manually

Select this item to configure up to three DNS IP
addresses.

Function Button Description

Apply Changes

Set new DNS relay configuration. New parameters will
take effect after save into flash memory and reboot the
system. See section “Admin” for save details.

Reset Selected

Discard your changes.