Diagnostic – HiRO H50212 User Manual
Page 185
User’s Guide
Configuring your Computers
185
46
Diagnostic
The DSL device supports some useful diagnostic tools.
Ping
Once you have your DSL device configured, it is a good idea to
make sure you can ping the network. A ping command sends a
message to the host you specify. If the host receives the
message, it sends messages in reply. To use it, you must know
the IP address of the host you are trying to communicate with
and enter the IP address in the Host Address field. Click Go! To
start the ping command, the ping result will then be shown in
this page.
2. From
the
head
Maintenance menu, click on Diagnostic ->
Ping. The following page is displayed:
3. Type the IP Address in the Host field.
4. Click
Ping
Fields
Description
Host
The IP address you want to ping.
Function
buttons
Description
PING
To start the ping command