HiRO H50212 User Manual
Page 51
802.11n WLAN ADSL2+ Router User’s Guide
51
Configuring your 1483 MER by DHCP
1. From
the
head
Setup menu, click on WAN. The following
page is displayed:
2. Enter VCI and VPI setting determined by your ISP.
3. Select the Encapsulation determined by your ISP.
4. From
the
IP Protocol drop-down list, select the IP Protocol,
IPv4, IPv6 or dual stacks IPv4/IPv6 determined by your ISP.
5. From
the
Channel Mode drop-down list, select 1483 MER
setting.
6. From
the
Type ratio, click DHCP.
7. IPv6 WAN setting determined by your ISP.
8. If you are happy with your settings, click Add
9. Your configuration is complete.
10. Now you are ready to Surf the Internet !!!