HiRO H50212 - Manual (Page 62)

User’s Guide Configuring your Computers
62
a. Bring up a shell.
b. Type pump -r to release the lease.
c. Type pump to renew the lease.
Note
If you change the LAN IP address of the device while connected
through your Web browser, you will be disconnected. You must
open a new connection by entering your new LAN IP address as
the URL.
10. From the left-hand menu, click on Save.
Adding the Secondary LAN IP address and subnet
mask
1. From the left-hand LAN menu, click on LAN.
2. Check
on Secondary IP.
3. Type the Secondary IP Address and Subnet Mask.
4. Click
Apply Changes.
5. From the left-hand menu, click on Save.