EZWatch EZ-TRACK-DOME - Manual (Page 7)

Azimuth Zero – This function allows the user to tell the camera what direction the
rotation degree 0 is. This affects the azimuth display on the camera which shows what
rotation degree the camera is currently facing.
Dome Settings 1 -> Power Up Submenu
This submenu allows the user to configure what action the camera takes when first turned
on.
None will instruct the camera to wait until action is initiated by the user.
Auto/Fame/Random scan instructs the camera to perform that scan when first turned on.
Preset 1/Preset 8 instructs the camera to rotate to one of those positions.
Pattern 1-4 instructs the camera to follow one of the four patterns.
Cruise instructs the camera to perform a preset cruise.
Tracking instructs the camera to begin motion tracking.
Dome Settings 1 -> Presets Submenu
This submenu allows the user to configure presets by storing a new preset (As an
alternative to storing them by using the ‘preset’ button), modifying an already-stored
preset, removing an individual preset, or giving the preset a name/label.
The first option, Preset Number, allows you to select which preset you’re configuring.
This menu can configure Presets 1 through 64.
The second option, Edit Preset Label, allows you to enter a name or label for the preset
that will be displayed when the camera is viewing that preset position.
The third option, Edit Preset Scene, is used to set or modify the location of a preset
position.
The last option, Clear Preset, allows you to delete a preset from memory.
Dome Settings 1 -> Patterns Submenu
This sub-menu allows you to program or clear a pattern from memory. A pattern is a
series of actions that are recorded and then followed once completed. This could be a
sequence of rotation/zoom and going to presets in any combination.
Programming a pattern is done from within this menu. Select the pattern (1 through 4
available), select Program Pattern, and perform the actions you wish duplicated. The
pattern can later be recalled by calling a preset (Presets 84 through 87 reference patterns
1 through 4 respectively), by setting a pattern as a park/power on action, or by triggering
an external alarm relay.
Clear pattern allows you to remove one of the patterns from the camera memory.