EUCHNER HBAS - Manual (Page 6)

EUCHNER Hand-Held Pendant Station
092491-07-01/09 Subject to technical modifications Page 6 / 34
3.2 Definition of the characters
Character format:
8 bits
Value range: 00H ... FFH
The value range is divided up as follows:
Value range Function Transfer direction
00H ... 1FH General control character for protocol
HBAS ÅÆ Control
system
30H ... 44H
Key code for the keys 1 to 20 and error
bytes HBAS
Æ Control
system
20H ... 53H
Control character or commands for the LC
display, the pulse generator and the
transfer of configuration parameters
Control system Æ
HBAS
80H ... FFH
Character set for the LC display
(see section Character set) Control system Æ
HBAS
Control characters:
Control
character
Value Function Explanation
STX 02H Start of Text
Start of the character string
to be sent
ETX 03H End of Text
End of the character string
to be sent
DLE 10H Data Link Escape Data transfer switch over
NAK 15H
Negative
Acknowledge
Negative response
BCC
Is calculated,
(section 3.3)
Block Check
Character Block check character for
checking correct data transfer