EUCHNER HBAS - Manual (Page 12)

EUCHNER Hand-Held Pendant Station
5.1.1 Change PIN (PIN ändern)
PIN ändern
Neue PIN:
****
PIN ändern
PIN bestätigen
****
Priorität
* HBA
-> Steuerung
Auswahl
Zurück
The Configuration (Konfiguration) menu is protected
with a PIN. The hand-held pendant station is supplied
as standard with the PIN: "1234". This PIN should be
changed by the customer to protect the configuration
settings for the hand-held pendant station.
Only the numbers 0-9 can be entered.
A digit is deleted using the key.
An entry is accepted using
.
Entry is cancelled using .
The PIN must be confirmed a 2nd time.
5.1.2 Priority (Priorität)
If the HBAS and the control system send STX
at the same time, the term collision is used.
It must be defined which end has priority.
Select using the
arrow -> with the
and accept using the key.
Leave the window with .
The setting currently saved is marked by
the * (asterisk) .
5.1.3 Version information (Versionsabfrage)
Version
Firmware V1.0
01.07.2003
Zurück
The current firmware version and the related date
are displayed in this window.
Leave the window with
.
5.1.4 Pulse generator (Impulsgeber)
The following functions can be selected on the
Pulse generator (Impulsgeber) menu:
IMPULSGEBER
Aktivierung
Verzögerung
• Activation (Aktivierung)
• Delay (Verzögerung Taste)
• Key assignment (Tastenbelegung)
• Frequency (Frequenz)
Select using the and
accept using the
key.
Leave the menu using .
092491-07-01/09 Subject to technical modifications Page 12 / 34