EUCHNER HBAS - Manual (Page 14)

EUCHNER Hand-Held Pendant Station
5.1.5 Key click (Tasten-Klick)
Tasten-Klick
Klick Ein
-> * Klick Aus
Auswahl
Zurück
It is possible to indicate when a key is pressed
by emitting a short sound.
Select using the
arrow -> with the
and accept using the key.
Leave the window with .
The setting currently saved is marked by the * (asterisk) .
5.1.6 Firmware Update
The hand-held pendant station is equipped with a flash
program memory. This enables the firmware to be changed
or updated. The update is done by the manufacturer.
5.2 Setting the baud rate
The hand-held pendant station automatically detects the baud rate of the control system
and sets itself accordingly. Possible values are 9600 and 19200 baud.
This automatic setting is made on the initialization of the hand-held pendant station
(see section 9). A change to the baud rate can only be made when the hand-held pendant
station is briefly isolated from the power supply. On the subsequent re-initialization the
HBAS is set to the new baud rate.
092491-07-01/09 Subject to technical modifications Page 14 / 34