EUCHNER CETx-AS-xxx-CB-xxx (Multicode) - Manual (Page 22)

Operating Instructions Safety Switch CET.-AS-...-CB-...
22
Technical data
Note:
If a product data sheet is included with the product, the information on the data
sheet applies in case of discrepancies with the operating instructions.
Technical data for safety switch CET.-AS-...-CB-...
Parameter
Value
Unit
min. typ. max.
General
Material, slide
Stainless steel
Material, safety switch housing Die-cast aluminum
Installation position Any (recommendation: switch head downward)
Degree of protection IP 67
Actuator approach speed, max. 20 m/min
Locking force F
max
6,500 N
Locking force F
Zh
in acc. with GS-ET-19
F
Zh
= F
max
/1.3 = 5,000 N
Weight Approx. 1.0 kg
Degrees of freedom (actuator in recess) X, Y, Z X, Y ± 5; Z ± 4 mm
Connection type (depending on version) Plug connector M12, 4-pin
Auxiliary voltage 24 -10%/+15% V DC
Current consumption 50 mA
Current consumption solenoid I
CM
400 mA
Classification acc. to EN IEC 60947-5-3 PDF-M
AS-Interface data EA code: 7 ID code: B
Total current consumption - - 30 mA
Valid AS-Interface addresses 1 - 31
AS-Interface inputs Acc. to AS-Interface Safety at Work
Door monitoring contact D0, D1
Solenoid monitoring contact D2, D3
AS-Interface outputs
Guard locking solenoid
D0, 1 = solenoid energized
Red LED D1, 1 = LED on
Green LED D2, 1 = LED on
Reliability values according to EN ISO 13849-1 Head downward or horizontal Head upward
Category 4 3
Performance Level (PL) e e
PFH
d
3.1 x 10 -9 / h 4.29 x 10 -8 / h
Mission time 20 20 years