ERICO TSGB Series Screw Gun Bracket - Manual (Page 2)

Bend here for 2-1/2" box.
TSGB24 Shown
Bend here for 2-1/8" box.
Bend here for 1-1/2" box.
For both standard TSGB16 & TSGB24,
and the assembled versions: Fold
the outside tab on both ends of TSGB
backward 180° until it meets the blank
tab.
Select desired box depth
and fold on that mark.
Bend back 180 .
Fold forward.
Attach fastener to
side face of the metal
stud with screw gun.
Position outlet box
on bracket and install
with screw gun.
TSGB16
Select height for box center line.
Set to desired height for box CL .
Align on stud.
Attach screw through keyhole.
Hang from Keyhole.
Level and attach opposite side.
May be used with CER4
as cable support.
Attach TEB23 box mount
at desired location.
CER4
TEB23
1. Can be mounted on face or inside the stud.
2. Can mount 1-1/2", 2-1/8" or 2-1/2" deep boxes.
Notched and marked for easy identification and bending.
3. Requires only a screw gun to install.
4. Box attaches with self-tapping screws. CADDY part number SMS8 or
mounting clips TSGLDR1 and TSGLDR1TC.
5. Eliminates movement of the box when used with flexible conduit,
ENT, MC, BX, or Non-metallic sheathed cable (NMC).
6. Allows multiple box mounting.
Side Mount
TECHNICAL SUPPORT:
www.erico.com CFS300_F
INSTRUCTION SHEET
2 OF 2 © 2000, 2007, 2009, 2010 ERICO International Corporation

