Environmental Express AutoBlock III - Manual (Page 25)

PROGRAM TAB
SYNTAX ERRORS
Run Tab
Select the method(s) and columns to run
Press RUN METHODS button
If there is an error in the method programming a popup will appear, note what syntax occurs
syntax error will appear with the following format:
SYNTAX ERROR# -COMMAND
# definition and description
10 value out of range
20 unrecognized
command
30 reagent not recognized
40 loop must execute at least 1 time
50 loop must use a stop loop command
60 elevator command must use up or down to specify location
The method will not continue until the syntax error is fixed in the program.
Return to the Program Tab, open the method and edit. SAVE the method before returning to the Run Tab
e
ENVIRONMENTAL EXPRESS
For technical support call 1-800-745-8218 or send email to [email protected]
5528MANUAL-program Rev 3 25 9/15/09