Enerpac W35000 - Manual (Page 4)

4
CE Declaration of conformity
Enerpac declares that the W22000 and
W35000 Series torque wrenches meet
the applicable standards and directives
issued by the European Community.
For a detailed list refer to the separate
certification sheet.
2 Safety
Be aware that the operator is fully
responsible during the operation of
this tool. Enerpac is not responsible for
damage or injury caused by misuse of
this tool. Under some circumstances,
additional safety precautions beyond
those described in this manual may be
required. Contact Enerpac immediately
if a potentially hazardous situation
arises.
Read this manual carefully and
observe all safety precautions.
- Make sure you have completed safety
induction training, specific to the work
surroundings. The operator should be
thoroughly familiar with the controls
and the proper use of the tool.
- The operator must be at least
18 years of age.
- Always wear protective headwear, ear
protectors, footwear and gloves (at a
minimum rigger type gloves) suitable
for safe operation of the tool.
The protective clothing must not
interfere with safe operation of
the tool or restrict the ability to
communicate with co-workers.
- Make sure your workplace is safe.
- Do not place any part of the body
between the reaction foot and the
reaction point.
- Do not place any objects between
the reaction foot and the reaction
point. Keep the hoses away from the
reaction points.
- Do not stand in the line of movement
1 Introduction
Overview
The Enerpac W-Series hydraulic torque
wrench is designed for controlled
tightening and loosening of fasteners
in industrial bolting applications. Its
low profile cassette, compact drive
unit and integrated reaction foot make
the W-Series ideal for use in locations
where workspace is limited.
Interchangeable W-Series cassettes
are available in a large assortment of
both metric and imperial sizes to suit
specific customer requirements.
An optional TSP-Pro Series Swivel
provides 360 degree X-axis and 160
degree Y-axis rotation, allowing easier
positioning of the wrench and hoses in
confined areas.
The W-Series can be used with a
wide range of Enerpac bolting pumps.
Electric, air and hand style models are
available.
Delivery instructions
Upon delivery all components must be
inspected for damage incurred during
shipping. If damage is found the carrier
should be notified at once. Shipping
damage is not covered by the Enerpac
warranty.
Warranty
• Enerpac guarantees the product only
for the purpose for which is intended.
• All Enerpac products are guaranteed
against defects in workmanship and
materials for as long as you own
them.
Any misuse or alteration invalidates the
warranty.
• Observe all instructions as
communicated in this manual.
• Replace any parts with Enerpac
spare parts only.