Enerpac HXD-Series - Manual (Page 4)

4
WARNING: To avoid personal injury, keep
hands away from support arm and working
area during operation.
CAUTION: Incorrectly connected
hoses cause malfunctions and are
hazardous. See
on page 7. Do
not change coupler positions on
wrench equipment. Clean coupler
halves before connecting. Use dustcaps
after disconnecting.
IMPORTANT: Enerpac THC-700
series 3,5:1 safety twin hoses must
be used with double-acting torque
wrenches.
IMPORTANT: Do not lift hydraulic
equipment by the hoses or swivel
couplers. Use the carrying case or
other means of safe transport.
CAUTION: Do not use worn or
damaged cassettes or reducer inserts. They
must fit precisely on the nut or bolt being
torqued. Do not use metric size cassettes
and reducer inserts on imperial bolt heads
and nuts or reverse. Avoid tilting the wrench.
WARNING: Always secure the
interchangeable cassette (4) in the wrench
(1) using the two dowel pins (3) to prevent
from slipping off the wrench. Both dowel
pins must “click” into the correct position.
4
2+3
10
4
“CLICK”
3
2