DIGIWEIGH DWP-102NS - Manual (Page 8)

4. GETTING STARTED
In order to obtain an accurate weighing result, the weighing platform,
(hereinafter referred as platform) must be placed on a strong and level
surface. Avoid using the platform and this instrument (hereinafter
collectively referred as scale) in environment where excessive wind flow,
vibration and extreme temperature change exist
General Warning: -
 The instrument is not an explosion proof device.
 The instrument is not a water proof device.
 Do not open the instrument, no user serviceable parts inside.
Always contact your dealer for service.
 The instrument not to be subject to shock, excessive vibration
or extremes of temperature (before or after installation).
4.1 BUILT-IN RECHARGEABLE BATTERY
The instrument is equipped with a built-in rechargeable battery. Before first
time use, recharge it for at least 8 hours to ensure the best battery
performance.
4.2 POWER ADAPTOR
Before plugging in the power adaptor, check and make sure the input
voltage of the adaptor matches with output voltage of the electricity outlet. If
not, contact your dealer immediately.
4.3 CONNECTING OTHER DEVICES
1
4.3.1 Connection with Weighing Platform (Load Cell)
Connect this instrument with a weighing platform (load cell) through load
cell connector located at the back according to the below pin assignment
table.
4-wire load cell or junction box is used as default,.6-wire load cell is optional