DIGIWEIGH DWP-102NS - Manual (Page 6)

7. ANI KEY
Press this key to enter animal weighing function
8.PERCENTAGE KEY
Press this key to enter percentage weighing function
9.PTARE KEY
Press this key to enter pre-set tare value
10.MC KEY
Press this key to recall total stored transactions.
11.CE KEY
Press this key to clear value entered.
12. NUMERIC KEYS
Numeric keys 0 ~ 9 and decimal key.
13.ON/OFF
Power on /off the indicator
14. CHECK SYMBOLS
 HI = Weight reading is higher than the HI limit entered,
 OK = Weight reading is in between than the low and HI limits entered,
 LO = Weight reading is lower than the LO limit entered.

15. TARE INDICATOR
Visible when the tare function is in effect. Weight reading shown is net value
16. STABLE INDICATOR
Visible when weight reading is stable.
17. ZERO INDICATOR
Visible when instrument is at true zero weight status.
18. WEIGHT UNIT
LED indication as below:
kg =
”kg” on, lb = “lb” on
oz = both
“kg” and “lb” on; g= neither “kg “ nor “lb” on
19. CHARGE INDICATION