Keys, display and connections – DIGIWEIGH DWP-102NS User Manual
Page 5
3. KEYS, DISPLAY AND CONNECTIONS
1.CNT KEY
Press this key to enter counting function
Press this key as next parameter when setting
2. WEIGHT UNIT KEY
Press this key to shift among various weight units.
Press this key as previous parameter when setting
3. WEIGH KEY
Press this key to back weighing status after counting, checking, animal
weighing, percentage function
4. PRINT KEY
Press this key to print the results to a computer or a printer through the
RS-232 output. according to the parameter setting whether accumulate or
not when printing
5.TARE KEY
Press this key to tare off the weight of a container.
Press this key to enter parameter setting when self-checking after power on
Press this key to confirm the parameter option
6. ZERO KEY
Press this key to set weight displayed to zero when an empty scale has
drifted away from a true zero reading.
Cancel or quit from the operations
6. CHECK KEY
Press this key to start check weighing function and to enter value for HI and
LO limit.