Despatch MIC1422 Controller - Manual (Page 59)

55
SECTION 10: ENABLE MODE
10.1 Enable Mode Description
The Enable Mode controls access to the various modes available.
To access the Enable Mode from the Control Mode, press the SCROLL key until Mod is
displayed. Press the DOWN key. This puts the control in Setup Mode. Press the
SCROLL key until EnAb is displayed. Press and hold the DOWN key for five seconds.
The lower display will read PASS. Use the UP and DOWN keys to change the upper
display to the correct Pass Code. Press the SCROLL key.
If the proper Pass Code was entered, the first parameter will read EPrE in the lower
display. If an improper Pass Code was entered, the control will return to the Setup
Mode.
A series of parameters in the Enable Mode is available by pressing the SCROLL key.
The parameter tag name will appear in the lower display with the upper display blank.
Press the SCROLL key. The parameter tag name will appear in the lower display with
the enable status in the upper display. Press the UP and DOWN keys to change the
enable setting. Once the proper value appears, press the SCROLL key again to display
the next tag name in the lower display with the upper display blank.
To return to the Setup Mode, press the UP key when the upper display is blank. Press
the UP key again to return to Control Mode.