Despatch MIC1422 Controller - Manual (Page 39)

35
SECTION 6: ALARM MODE
6.1 Alarm Mode Description
The Alarm Mode contains parameters concerning process alarms.
To access the Alarm Mode from the Control Mode, press the SCROLL key until Mod is
displayed. Press the DOWN key. This puts the control in Setup Mode. Press the
SCROLL key until ALA is displayed. Press the DOWN key to access the Alarm Mode.
A series of parameters is available by pressing the SCROLL key. The parameter tag
name will appear in the lower display with the upper display blank. Pressing the
SCROLL key again will display the tag name in the lower display and the parameter
value in the upper display. The value can then be edited by pressing the UP and
DOWN keys. Once the proper value appears press the SCROLL key. The next
parameter tag name will be displayed in the lower display with the upper display blank.
The mode list of parameters may be viewed quickly by pressing the DOWN key with the
upper display blank. A subsequent press of the SCROLL key will show the parameter
setting in the upper display.
To return to the Setup Mode, press the UP key with the upper display blank. To return
to the Control Mode from the Setup Mode, press the SCROLL key until Ctrl is
displayed, then press the DOWN key.