Dascom DT-230 User Guide - Manual (Page 61)

Tally Dascom DT-210/230
50
Command Name
GS ( k
Set up and print symbol
PDF417: Set the number of columns in the data region.
PDF417: Set the number of rows.
PDF417: Set the width of the module.
PDF417: Set the row height.
PDF417: Set the error correction level.
PDF417: Select the options.
PDF417: Store the data in the symbol storage area.
PDF417: Print the symbol data in the symbol storage area.
PDF417: Transmit the size information of the symbol data in
the symbol storage area.
QR Code: Set the size of module.
QR Code: Select the error correction level.
QR Code: Store the data in the symbol storage area.
QR Code: Print the symbol data in the symbol storage
area. QR Code: Transmit the size information of the
symbol data in
GS Define downloaded bit image
GS / Print downloaded bit image
GS : Start/end macro definition
GS B Turn white/black reverse print mode on/off
GS H Select print position of HRI characters
GS I Transmit printer ID
GS L Set left margin
GS P Set horizontal and vertical motion units
GS V Select cut mode and cut paper
GS W Set print area width
GS \ Set relative vertical print position in page mode
GS ^ Execute macro
GS a Enable/disable Automatic Status Back (ASB)
GS f Select font for HRI characters
GS g 0 Initialize maintenance counter
GS g 2 Transmit maintenance counter
GS h Set bar code height
GS k Print bar code
GS r Transmit status
GS w Set bar code width
FS p Print NV bit image
FS q Define NV bit image
GS v 0 Print raster bit image