Dascom DT-230 User Guide - Manual (Page 59)

Tally Dascom DT-210/230
48
7 Printing Control Command Sets
∙ Be compatible with ESC/POS command set
∙ Support NV image and page mode printing
List of Commands
Command Name
HT Horizontal tab
LF Print and line feed
FF Print and return to standard mode (in page mode)
CR Print and carriage return
CAN Cancel print data in page mode
DLE EOT Transmit real‐time status
DLE ENQ Send real‐time request to printer
Generate pulse in real‐time (fn = 1)
Execute power‐off sequence (fn = 2)
DLE DC4
Clear buffer(s) (fn = 8)
ESC FF Print data in page mode
ESC SP Set right‐side character spacing
ESC ! Select print mode(s)
ESC $ Set absolute print position
ESC % Select/cancel user‐defined character set
ESC & Define user‐defined characters
ESC Select bit‐image mode
ESC − Turn underline mode on/off
ESC 2 Select default line spacing
ESC 3 Set line spacing
ESC = Select peripheral device
ESC ? Cancel user‐defined characters
ESC @ Initialize printer
ESC D Set horizontal tab positions
ESC E Turn emphasized mode on/off
ESC G Turn double‐strike mode on/off
ESC J Print and feed paper
ESC L Select page mode
ESC M Select character font
ESC R Select an international character set
ESC S Select standard mode
ESC T Select print direction in page mode
ESC V Turn 90 degrees clockwise rotation mode on/off
ESC W Set print area in page mode
ESC \ Set relative print position