Dascom DT-230 User Guide - Manual (Page 42)

Tally Dascom DT-210/230
31
5.4 Paper specification
Paper type Specified thermal paper
Form Roll paper
Roll paper diameter 83 mm {3.27"} maximum
Min. core diameter 13mm
Take‐up roll paper
width 80 + 0.5/‐1.0 mm
Size
Paper width 79.5 ± 0.5 mm
CAUTION
• Paper must not be pasted to the roll paper spool.
• The remaining amount of the roll paper when a roll
paper near‐end is detected differs depending on the spool
type.
Printable Area
The printable area of a paper with width of 79.5 ± 0.5 mm {3.13 ± 0.02"} is 72.2 ± 0.2 mm {2.84 ± 0.008"} (576 dots)
and the space on the right and left sides are approximately 3.7 ± 2 mm {0.15 ± 0.079"}.
Paper width
All the numeric values are typical.