Dakota Ultrasonics PVX User Manual
Page 24
Dakota Ultrasonics
20
3.16 ENTER key
The ENTER key is used in the overall menu selection process, to activate list and
edit boxes, and save measurements to grid locations.
3.17 MULTI MODE Key
The MULTI MODE key activates the Load Setup List to select a factory or
previously saved user setup for a variety of different transducer types and scope
settings. This is a quick and efficient way to change modes and transducer types
without having to manually adjust PVX. The factory setups serve as the perfect
starting point for immediate use or further fine-tuning.
3.18 ON/OFF Key
The ON/OFF key simply powers the unit either ON or OFF. Note: Unit will
automatically power off when idle for 5 minutes. All current settings are saved prior
to powering off.
3.19 Top & Bottom End Caps
The top & bottom end panels are where all connections are made to the PVX. The
diagram above shows the layout and description of the connectors:
Transducer Connectors
Refer to Diagram: The transducer connector and battery cover/probe zero disk are
located on the PVX’s top end cap. The transducer connector is of type Lemo “00”.