Brother DCP-540CN - Manual (Page 50)

44
6
Your Brother machine supports the
PictBridge standard, allowing you to connect
to and print photos directly from any
PictBridge compatible digital camera.
Before Using
PictBridge
6
PictBridge requirements
6
To avoid errors, remember the following
points:
The machine and the digital camera must
be connected using a suitable USB cable.
The image file extension must be .JPG
(Other image file extensions like .JPEG,
.TIF, .GIF and so on will not be
recognized).
PhotoCapture Center operations are not
available when using the PictBridge
feature.
Using PictBridge
6
Setting your digital camera
6
Make sure your camera is in PictBridge
mode. Some of the settings listed below may
not be available for your PictBridge
compatible digital camera.
Depending on your camera some of these
settings may not be available.
1
See DPOF printing on page 45 for more details.
2
If you camera is set to use the Printer Settings
(Default setting), the machine will print your photo
using the settings below.
Printing photos from a camera
with PictBridge
6
Camera
Menu
Selections Options
Paper Size Letter, A4, 10 ×15cm,
Printer Settings (Default setting)
2
Paper Type Plain Paper, Glossy Paper,
Inkjet Paper.
Printer settings (Default setting)
2
Layout Borderless: On, Borderless: Off,
Printer Settings (Default setting)
2
DPOF setting
1 -
Print Quality Normal, Fine,
Printer Settings (Default setting)
2
Color
Enhancement On, Off, Printer Settings
(Default setting)
2
Settings Options
Paper Size 10
×15cm
Paper Type Glossy Paper
Layout Borderless: On
Print Quality Fine
Color Enhancement Off