Brother DCP-540CN - Manual (Page 46)

Chapter 5
40
d
If you do not want to change additional
settings, press Colour Start to print.
Adjusting Brightness,
Contrast and Colour
5
Brightness
5
a
Press a or b to choose Brightness.
Press OK.
b
Press a to make a lighter print or press
b to make a darker print.
Press OK.
c
If you do not want to change additional
settings, press Colour Start to print.
Contrast
5
You can choose the contrast setting. More
contrast will make an image look sharper and
more vivid.
a
Press a or b to choose Contrast.
Press OK.
b
Press a to increase the contrast or
press b to decrease the contrast.
Press OK.
c
If you do not want to change additional
settings, press Colour Start to print.
Colour Enhancement
5
You can turn on the colour enhancement
feature to print more vivid images. Printing
time will be slower.
a
Press a or b to choose
Color Enhance
.
Press OK.
b
Do one of the following:
If you want to customize the White
Balance, Sharpness or Colour
Density, press d or c to choose On
and then go to step c.
If you do not want to customize,
press d or c to choose Off.
Press OK and then go to step f.
c
Press a or b to choose
White Balance
, Sharpness or
Color Density .
Press OK.
d
Press a or b to adjust the degree of the
setting.
Press OK.
e
Do one of the following:
If you want to customize other colour
enhancement, press a or b to
choose other option.
If you want to change other settings,
press a or b to choose Exit, and
then press OK.
f
If you do not want to change additional
settings, Colour Start to print.
Note
• White Balance
This setting adjusts the hue of the white
areas of an image. Lighting, camera
settings and other influences will effect the
appearance of white. The white areas of a
picture may be slightly pink, yellow or
some other colour. By using this setting,
you can correct that effect and bring the
white areas back to pure white.
• Sharpness
This setting enhances the detail of an
image, similar to adjusting the fine focus
on a camera. If the image is not in true
focus and you cannot see the fine details
of the picture, then adjust the sharpness.
• Colour Density
This setting adjusts the total amount of
colour in the image. You can increase or
decrease the amount of colour in an
image to improve a washed out or weak
picture.